Posts Tagged ‘logic’

The Induction Computer Part 3

July 25, 2017

The Induction Computer – Part 3

by Arto Juhani Heino (c) 2017

From my last entry I hinted at a 555 relay emulation, I am not quite their yet, I am getting close though. Here is my current stage I am on at the present moment.

I needed an ALU to start things of, so I started on the Half-Adder as a building block, here is my iterations.

The next step is the Full-Adder and its first few iterations from Logic Gates.

Lastly I have included a simple idea of how some of these could be interpreted in the 3D world, more to come on this aspect in a future blog.

If your response is high enough, I will start a Patreon account and begin building the real thing, regards Arto.

The Induction Computer Part 2

July 8, 2017

The Induction Computer – Part 2

by Arto Juhani Heino (c) 2017

It looks like I am reinventing the wheel, minus valves and transistors, this work might even seem redundant to some of the techno-nerds. I assure you this is a step forward, there has been no time in the last 50 years that all those electronic enthusiasts have been able to simplify and create something without an official corporately designed IC package doing all your brain-work for you, leaving nothing for your own original imagination. I was very excited many years ago when many hobbyists made their own computers from discreet transistors and IC packages, while a few even made some relay ALUs.

While I thought of making my own CPU from relays but resisted, I first needed to create a new architecture that could incorporate an open 256 bit CPU and a Analog CPU  in one package, while still accessible enough to be built by hand. This was part of my goal, as the architecture had to be robust, to last 1000 years, the components were to be the built environment and the power to drive it should be available 24/7, sounds like a pipe dream of some mad scientist. I only dare to dream of its reality and decided to rediscover the simplicity and the basic technology to make it plausible. The idea of using stone to contain the complex logical matrix that can be accessed via simple interfaces is the final reality, the many steps to arrive at that outcome might outstrip my lifetime, still I will persist, as I cannot dismiss a vision that is clear and within the realms of possibility.

Enough of my machinations, here are some interesting and practically solved devolutions of known devices from my last posting. Here is a FlipFlop made from two relay NAND gates.

While the idea of a Operational Amplifier kept me awake for a night of two, I hope to emulate a 555 IC chip from my work here, just in time to compete a chapter in my Volume II.

This version should satisfy many of its Integrated Chip operations, still it is a crude and very fundamental design, useful to be expanded upon with a bit more work. I must repeat, I am not an electrical engineer and I have no degree from any University, I  am truly a ground up natural scientist, where my tenets of understanding come from a life time of artistic creativity with careful observations and practical applications. I hope those who are interested can learn much from my ideas. Regards Arto.


The Induction Computer

July 1, 2017

The Induction Computer

by Arto Juhani Heino (c) 2017

Here are some interesting combinations using relays as logic gates, which was where I began this first step into the Induction Computer.

As you can see I have “single relays” and “double pole relays” and “Latch relays”, an old technology that goes back to the beginnings of the study of electromagnetism in the 1800’s. My studies into remnant magnetism of different materials, brought me into an understanding of natural rocks and the possibility of using either “Granite”, other rocks or even a poured casting as a magnetically imprinted “Logic Matrix Array”, storing functions, complex procedures, information and even pictures, videos and music.

In the Voltage Multiplier I have even eliminated any semiconductors, even diodes and batteries, while only using coils, capacitors, magnets and relay operations. You can see my process of elimination and the final schematic being without any high tech micro components.

There are a few parts to make the whole system function, here are some of the descriptions for the Voltage Multiplier.

The Slab that must have
1 Remnant Magnetism within permissible limits
2 Flat Surface, possibly engraved for descriptive and functional reasoning
3 Location keys for Imprinter and Reader

The Matrix Imprinter
1 Magnetic Array
2 Electromagnetic Array
3 Reset and Wipe function

The Induction Reader
1 Layered Switch Array
2 Geometric Coil Matrix
3 External Switches/Buttons and Levers/Handles arced or rotary

Physical Actions of Operator
1 Generate Voltage
2 Instigate Switch Operations
3 Discharge to external device

As this blog article is only to describe some of my work, it is not the whole article, that you will find in my next volume of “Talking To The Birds” Volume II. If the interest in these ideas are popular, I would consider a FundMe or Patreon profile and begin the arduous progress of a working system , regards Arto.